主營產品:

超聲波測厚儀,風速儀,測力計,噪音計,涂層測厚儀,頻閃儀

聯系我們
公司新聞 更多>>
技術文章 更多>>
產品資料
產品[

美國派克DA400S磁粉探傷儀

]資料
如果您對該產品感興趣的話,可以 sendmsg
產品名稱: 美國派克DA400S磁粉探傷儀
產品型號: DA400S
產品廠商: 其它品牌
產品文檔: 無相關文檔
簡單介紹
    

美國派克DA400S磁粉探傷儀/美國PARKER公司磁粉探傷儀DA-400采用了許多先進技術來形成感應磁場,具有極高通用性,固定的AC或DC磁場,用于表面和近表面缺陷的檢測,是控制器與固態電子器件為一體的高性能的輕便儀。可疳高能磁場集中施加到檢測區,快速準確發現材料缺陷。磁極可將AC或DC磁場施加到各種形狀工件的檢測區域,沒有電弧**。

美國派克DA400S磁粉探傷儀 的詳細介紹
美國派克DA400S磁粉探傷儀美國PARKER公司磁粉探傷儀DA-400采用了許多先進技術來形成感應磁場,具有極高通用性,固定的AC或DC磁場,用于表面和近表面缺陷的檢測,是控制器與固態電子器件為一體的高性能的輕便儀。可疳高能磁場集中施加到檢測區,快速準確發現材料缺陷。磁極可將AC或DC磁場施加到各種形狀工件的檢測區域,沒有電弧**。

DA400S磁粉探傷儀的技術參數:

型號 DA400DA400S
電源110VAC 50-60Hz230VAC 50-60Hz
電流4A3A
磁場交流交直流
工作周期2分鐘開/關2分鐘開/關
重量3.68Kg3.68Kg
尺寸188*235*54mm 188*235*54mm
磁極間距0-305mm 0-305mm
電纜3芯2m長電纜3芯2m長電纜

DA-400 Series Contour Probes®

The DA-400 Contour Probe is a portable, self-contained instrument designed to produce a magnetic field on or within ferro-magnetic materials.

The selective AC and pulsed DC functions are built into a single reliable instrument. The AC mode produces an intense AC field for detection of surface defects and demagnetizing after inspection. The DC mode produces an intense pulsed DC field for detection of some subsurface defects.

Controls and solid-state electronics are contained within the high impact molded housing. Articulating legs allow the AC or DC field to be applied to the precise area of inspection on nearly any part of the surface shape... in the lab, factory or field site.

All Parker Contour Probes comply with the requirements of applicable specifications. Certified for European CE requirements.

  • Versatility and powerful performance in a lightweight (8 lbs.) instrument
  • Constant AC or pulsed DC fields with the flip of a switch for the location of surface and some sub-surface defects
  • Apply continuous or residual magnetic fields and demagnetize too
  • Use with dry powder, wet fluorescent or visible
  • High impact molded housing
  • One year repair/replacement guarantee

DA-400s Series Contour Probes® SPECIFICATIONS

ElectronicsReliable solid state circuitry contained within molded housing
Mechanical capacityMinimum-Maximum distance across poles: 0 to 12"(0-305mm)
Fields – selectiveAC: constant level
DC: pulsed DC
Flux density approximately 68,000 lines per square inch at 4" pole spacing. (50 pound pull.)
Power source105-230 VAC, 50-60 Hz, 4 Amps
3-connector power cord and plug.
(Available in export voltages.)
Controls1   Momentary, push to test
2   AC/DC selector switch
weight3.4kg
FinishInjection Molded Housing
Glass Filled Nylon®
 

產品留言
標題
聯系人
聯繫電話
內容
驗證碼
點擊換一張
注:1.可以使用快速鍵Alt+S或Ctrl+Enter發送資訊!
2.如有必要,請您留下您的詳細聯繫方式!

組織機構代碼證   企業法人營業執照   支付\配送   售后服務
Copyright© 2003-2019  上海壹琦儀器儀表有限公司版權所有
    電話:021-51099302 021-69896116     傳真:021-69896115    地址:上海市棲林路425弄2號202室    郵 編:201802
滬ICP備08002114號-4